PILOT Fountain Pen Cleaning Kit

PILOT Fountain pen cleaning kit containing bulb syringe and 5 saches of cleaning solution.

(1) As shown in Fig. 1, attach the cleaning dropper to the pen tip neck shaft and push the cleaning dropper in a cup of water to clean the inside of the pen tip neck shaft.
(2) Discard the dirty water after cleaning, and dilute a bag (8 ml) of cleaning solution with 100 ml of water as shown in Fig. 2.
(3) Immerse the pen tip neck shaft in the diluted cleaning solution as shown in Fig. 3 for 8 to 10 hours.
④ Replace the water in the cup with clean water.
⑤ As shown in Fig. 1, attach the cleaning dropper to the pen tip neck shaft and push the cleaning dropper about 10 times while replacing the water in the cup to wash away the cleaning liquid inside the pen tip neck shaft.
(6) Remove the cleaning dropper, rinse the inside of the pen tip neck shaft with running water, wipe off the water with a cloth, and dry it.

* Do not use the cleaning solution as an undiluted solution, but always dilute it before use.
* After using the cleaning liquid, rinse it well with running water so that the cleaning liquid does not remain on the pen tip neck shaft.
* The cleaning solution is not a drink.
* Keep out of reach of children.
* Do not place in direct sunlight or places with high temperatures.
* Do not use for anything other than pilot products.
* Cannot be used for lacquer products (including lacquer work), inhalation fountain pens (S-type / P-type) eg Custom 823, heritage 92, and Justus 95.
* If you accidentally swallow the cleaning solution, take measures such as drinking water without vomiting, and if it gets in your eyes, rinse with running water for at least 15 minutes without rubbing, and then consult a doctor.